All Sets

Contains: 
1 Tray for Implants with Lid, stackable
1 Screwrack 2.7
1 Screwrack 3.5
1 of each Plate (24 pcs. total)
5 of each 2.7 Locking Screw (10-46mm, 95 pcs. total)
5 of each 3.5 Locking Screw (10-50mm, 100 pcs. total)

4 Seaths, 2 Trocar pyramid tip, 2 Obturators

Contains: 
Sterilization Tray with Lid
1 of each Spinal Cage
1 of each Seizing Cage
2 Placement Rods
Spinal Curette
Screwdriver Shaft
Screwdriver Handle Silicone
1 of each Locking Drill Guide
2 Drills (2.0/2.5mm)
5 of each Screw (10, 12, 14, 16, 18, 20mm)
(30 pcs. total)

Set contains:
Hook Probe
Banana Knife
Curettes 2,3,4 & 5 mm
Curette curved, 5mm
2 pick probes, strongly and slightly curved
2 elevators, standard 110mm, large 150mm, short 65mm
Dissector Periostal Elevator
6 Ferris Smith Arthroscopic Rongeurs, (3x10, 4x10, 6x10, 6x12, 4x10 up- & 4x10 down angle)
5 Arthroscopic Rongeurs, (Schlesinger, Wilde Ethmoid, McIlwraith Peapod)
Hook Grasping Forceps 2x2 teeth
Hook Grasping Forceps Suprapatellar

K-Wire Instrument Set (Set No. 111-0015-20)

The K-Wires contained in the set are single trocars with round ends.

Contains: 
1 LEICOM Compression Screws Set Tray with 
Lid 
1 of each LEICOM Compression Screws (Micro 2.4/3.1, 8-30mm // Mini 3.0/3.9, 
10-40mm // Medi 4.0/5.0, 14-60mm // Maxi 5.0/6.0, 20-60mm // 61 total)
1 Screwdriver Handle
1 of each Screwdriver Shaft T6 & T8, cannulated (2.4& 3.0mm)
1 of each Screwdriver Shaft T10 & T15, cannulated (4.0 & 5.0mm)
1 of each Screw Head countersink, cannulated (2.4 & 3.0mm) 
1 of each Screw Head countersink, cannulated (4.0 & 5.0mm) 
1 of each Drill Bit (Ø 1.8mm, 2.3mm, 2.7mm & 3.8mm)
1 Screw Depth Gauge
K-Wires (Ø 0.9mm x 150mm, Ø 1.5mm x 150mm)

Contains:
1 LEICOM Compression Screws Set Tray with Lid
1 of each LEICOM Compression Screws (Micro 2.4, 8-14mm & 24-30mm // Mini 3.0, 10-18mm & 32-40mm // 18 total)
2 of each LEICOM Compression Screws (Micro 2.4, 16-22 // Mini 3.0, 20-30mm // 20 total)
1 Screwdriver Handle
1 of each Screwdriver Shaft T6 & T8, cannulated (2.4 & 3.0mm)
1 of each Screw Head countersink, cannulated (2.4 & 3.0mm)
1 of each Drill Bit (Ø 1.8mm & 2.3mm)
5 K-Wires (Ø 0.9mm x 150mm)

Contains:
1 LEICOM Compression Screws Set Tray with Lid
1 of each LEICOM Compression Screws (Medi 4.0, 14-24mm & 38-60mm // Maxi 5.0, 20-28mm & 40-60mm // 22 total)
2 of each LEICOM Compression Screws (Medi 4.0, 26-36// Maxi 5.0, 30-38mm // 22 total)
1 Screwdriver Handle
1 of each Screwdriver Shaft T10 & T15, cannulated (4.0 & 5.0mm)
1 of each Screw Head countersink, cannulated (4.0 & 5.0mm)
1 of each Drill Bit (Ø 2.7mm & 3.8mm)
5 K-Wires (Ø 1.5mm x 150mm)

Contains:
1 LeiMESH 3D Dynamic Titanium Mesh 
5 of each LeiMESH Titanium Screws (Ø 1.6 mm, Lengths: 4 - 8 mm // 25 total)
1 LeiMESH Screwdriver Handle
1 LeiMESH Screwdriver Shaft 
1 of each Micro Twist Bone Drill (Ø 1.0 mm, Drill Lengths: 3 mm, 5 mm, 8 mm) 
Universal Wire Scissors
1 Tray for LeiMESH Set with Lid

Contains:
Sterilization Tray with Lid
3 of each 2.0mm Screw (6-20mm, 24 pcs. total)
3 of each 2.4mm Screw (6-40mm, 54 pcs. total) 
1 of each Rapid Luxation Plate (3 pcs. total)
1 of each Patella Spacer (18 pcs. total)
Large Sawguide with Pin & K-Wire
Petite Sawguide with Pin & K-Wire
Tibia Tappet  Petite 
Tibia Tappet  Standard 
Screwdriver Handle
Screw Driver Shaft 2.4/2.0 or T8 
Holding Sleeve (Hexagonal Set only)
Plate Holding Forceps
Depth Gauge
Drill Guide
Drills 1.5 + 1.8

Complete with Trocar/Obturator and Stopcock 3.2 mm